Product Description:

The 2AD225C-B35OA1-AS03-A2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. In automated cells, this motor supplies continuous rotary power to conveyor sections, packaging spindles, or hydraulic pumps. It converts three-phase electrical energy into mechanical torque for processes that demand reliable speed regulation.

The cooling system uses an internal axial blower to move air along the stator and end windings, keeping temperature rise within acceptable limits during duty cycles. Position and velocity are monitored by high-resolution motor feedback, providing fine incremental data for closed-loop controllers. With frame designation 225, the motor has a large exterior diameter and bolt pattern, giving the unit a large electromagnetic cross-section. Mechanical installation flexibility is achieved with flange and foot mounting, so the housing can be fixed to a base plate or to a machine interface ring. Power enters through a junction box, which simplifies line termination and shields conductors from oil mist. The driven element is coupled to a smooth shaft without a seal, a layout selected to minimize friction in dry-running applications. Standard-grade bearings support radial and axial loads, and the motor is supplied without a holding brake for systems where dynamic stopping is handled electrically.

The motor uses length code C, which indicates the axial stack height without increasing footprint width. Rotational balance conforms to vibration grade R, reducing transmitted oscillations to surrounding structures at nominal speed. Stator winding code AS matches the impedance profile expected by 2AD drives, allowing correct current vector control. Power leads exit on side A from the top of the frame, which helps with cable trays routed above the machine. There is no shaft end on the rear side, permitting close-coupled arrangements with gearboxes or cooling ducts.