Product Description:

The 2AD225C-B35LB2-AS06-C2V2 is an AC induction motor from Bosch Rexroth Indramat's 2AD 3-Phase Induction Motors series. Within automated lines, the unit converts electrical energy into rotational power for material-handling axes, packaging machinery, and large process drives that require continuous torque and closed-loop speed regulation. The motor uses length code C and has no rear shaft end, which keeps the mechanical output concentrated on a single driven side.

Mechanically, the rotor is supported by heavy-duty bearings that tolerate high radial loads during long duty cycles. Thermal management is handled by an axial blower mounted on the housing, and the forced airflow keeps winding temperature within limits at low motor speeds. Position and velocity are reported through digital servo feedback, allowing the drive controller to apply vector control for precise speed regulation. With a frame size of 225, the motor has a stator stack diameter suited to high-output applications. The housing supports flange and foot mounting, so the motor can be secured to a baseplate or a machine wall without additional brackets.

The electrical interface is housed in a junction box that is oriented to the left when facing the output shaft, and all power conductors exit toward Side B to simplify cable routing inside compact cabinets. The output uses a smooth shaft with a shaft seal, which helps prevent lubricant leakage and blocks airborne contaminants at the coupling. Dynamic balance follows vibration grade S, which reduces residual motion at operating speed. Winding code AS indicates the stator layout used with standard 2AD drives for nominal current draw. The motor is supplied without a holding brake for applications that already use external mechanical locking, and cable entry remains accessible because the terminals sit behind a removable cover on the junction box.