Product Description:

The 2AD225C-B35LB2-AS03-A2V1 is an AC induction motor from Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series. Within automated machining centers, material-handling lines, and similar installations it provides three-phase torque for continuous motion stages. The unit acts as a workhorse drive element, supplying rotary power that can be regulated by a compatible frequency inverter and feedback loop, thereby delivering dependable speed and position control for industrial automation tasks.

Internal mechanical durability begins with the heavy-duty bearings that support the 225-frame rotor and permit sustained radial loads. Heat is removed by an axial blower on the non-drive end; forced airflow keeps windings within limits during continuous operation. Rotor angle data is provided by the integrated high-resolution motor feedback, allowing tight speed regulation. The motor meets vibration grade R, reducing oscillations transferred to mounting frames. Electromagnetic behavior is set by winding code AS, which indicates impedance and current characteristics for medium-voltage inverters. Size code 225 with length code C establishes the mechanical envelope, and operation proceeds without a holding brake to cut inertia and simplify release mechanisms.

Installation flexibility is provided by the flange and foot mounting pattern, letting builders secure the housing to base plates or end shields without additional adapters. Incoming power is routed through terminals positioned on side B inside a sealed junction box set on the left when viewing the shaft, an orientation that keeps cabling clear of service areas. The drive end carries a smooth shaft without a shaft seal, while the opposite side is supplied without a shaft extension, enabling direct coupling or belt pulleys as required. Length code C keeps the body short for retrofit spaces, and the balanced rotor meets size 225 dimensions without increasing noise.