Product Description:

The 2AD225C-B35LB1-AS06-D2V1 is an AC induction motor engineered by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. The unit converts electrical power into rotational motion for conveyors, machine tools, and other automated axes that demand constant torque from a squirrel-cage motor. Its design supports closed-loop operation with associated Rexroth drive controllers, allowing the motor to run at commanded speeds while maintaining accuracy under variable mechanical loading.

Heavy-duty bearings support radial loads from pulleys and gear sets, and the larger bearing cross-section helps extend service life. Cooling air is forced over the stator by an axial blower, so thermal limits are maintained during continuous duty. Position and velocity are returned to the drive through digital servo feedback, enabling vector control rather than simple V/F operation. With frame designation 225, the motor uses the center height and bolt pattern associated with that size, and motor length code C increases active iron depth for higher power within that frame. Mechanical integration is simplified by flange and foot mounting, which provides B35 flange faces or foot pads without adapters. The winding code AS uses copper and insulation matched to standard line voltages.

The power leads exit on Side B and, when viewed from the shaft, the junction is on the left, so conduit can be routed parallel to the machine bed. The aluminum junction box protects the terminals and accepts removable glands for shielded cable. Because the motor is supplied without a holding brake, vertical axes must rely on external clamps during shutdown. The shaft extension uses a balanced with an entire key configuration and a shaft seal to limit grease migration, while the opposite end is delivered without a shaft end. Dynamic behavior is refined by vibration grade R, which restricts residual imbalance for smoother operation at high speeds.