Product Description:

The 2AD200C-B35RA1-AS06-H2N1 is an AC induction motor produced by Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series. It serves as the prime mover in automated axes by converting three-phase electrical energy from a drive controller into continuous rotary motion for conveyors, spindles, and packaging stations. This operating role allows the machine to maintain commanded speed and stable torque during demanding production cycles and changing process loads.

Cooling is handled by an internal axial blower that forces air along the stator so winding temperature stays within allowable limits during continuous duty. Rotor position is returned through digital servo feedback, giving the controller real-time data for closed-loop regulation. Frame size 200 provides a wide magnetic cross-section, and length code C adds axial iron for additional output. Mechanical integration is supported by flange and foot mounting, allowing either base or face installation. Because the motor is supplied without a holding brake, deceleration torque must be provided by the drive or by an external mechanism. Power conductors enter on side A, while standard bearings, winding code AS, and a junction box complete the electrical and mechanical layout.

The junction box is oriented to the right side when the shaft is viewed from the front, which can simplify cable routing along a machine wall or inside a guarded enclosure. The output shaft is supplied with a shaft seal and balanced with a half key, helping reduce coolant entry while supporting accurate coupling alignment. The rear face has no second shaft end, which keeps overhung mass lower and leaves more space for adjacent machine components. Vibration grade R indicates the rotor balance quality used for operation at rated speed and helps limit dynamic forces on connected bearings and tooling.