Product Description:

The 2AD200C-B35RA1-AS06-A2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It converts electrical energy into continuous rotary motion for machining centers, material-handling axes, and other automated stations that require a constant torque source tied directly to a drive controller. The motor is supplied without a holding brake, so stopping or load retention must be handled by dynamic braking or a separate mechanical device.

The rotor is supported by heavy-duty bearings that allow long operating cycles under radial and axial loads common to belt-driven transmissions. Thermal management is handled by an integrated axial blower; the blower forces air along the stator housing so winding temperature stays within insulation limits during sustained output. Position and velocity are supervised through digital servo feedback, enabling the drive to close control loops without external encoders. The motor can be fastened by either a flange face or a foot plate through the combined flange and foot mounting arrangement. Incoming power is routed through a sealed junction box that sits on the right side when viewed from the shaft end, and the conduits exit toward Side A to match standard cabinet layouts. A frame size code of 200 indicates a stator diameter suited to high-torque duty, while the length code C indicates the active stack height.

The mechanical interface uses a smooth shaft without a seal, so external guards or couplings must provide their own contamination barrier. On the opposite face, there is no shaft extension, which reduces overhung mass when the motor is mounted vertically. The motor has a vibration grade of R, which limits peak displacement during startup and helps protect adjacent bearings and feedback devices. Electrically, winding code AS matches the impedance expected by standard Rexroth drives, keeping current, slip, and torque curves within normal operating limits.