Product Description:

The 2AD200C-B35OR2-AS06-D2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. It supplies rotational power for automated processes such as material-handling lines, packaging systems, and metal-forming stations. When connected to a compatible drive inverter, the motor delivers variable-speed torque that can be synchronized with machine commands, enabling precise motion sequences in continuous-duty industrial environments.

This unit follows the dimensional framework identified by its 200 size code and C length code, giving it a stator stack suited for mid-range power levels without excessive footprint. Heat generated in the windings is removed by an axial blower, so full-load operation is possible inside enclosed cabinets where natural convection is limited. Mechanical interface flexibility is provided by flange and foot mounting, letting the housing be bolted either to a base plate or to a machine wall. Power conductors enter a junction box located on the top of the frame, and the connection faces to the right, simplifying cable runs in line-mounted arrays. The motor is delivered without a holding brake, so static load retention must rely on the drive. Side B is machined without a shaft end, allowing close-coupled gearsets on the driven side.

Control precision is achieved through digital servo feedback, which returns real-time rotor position data to the inverter for closed-loop speed regulation. Internally, heavy-duty bearings support radial and axial forces expected in conveyor pulleys and belt transmissions, while the shaft is protected by a seal and is balanced with the entire key to minimize runout. The winding set is designated AS, matching specific voltage and frequency ratings used by compatible Rexroth drives, and dynamic behavior complies with vibration grade R so equipment frameworks are not overloaded by oscillations during acceleration.