Product Description:

The 2AD200C-B35OR1-BS06-A2N3 is an AC induction motor built by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. With a frame size code of 200, the unit supplies three-phase rotary power to automated machine axes, conveyors, and processing spindles where constant torque and speed regulation are required. It operates as the primary mover in closed-loop drive systems, receiving commands from a controller and converting them into mechanical rotation for industrial automation tasks. Its induction design suits applications that need durable rotary drive performance over long production runs. When paired with a compatible controller, the motor can support steady operation during repeated starts, speed changes, and load variations.

The motor is cooled by an internal axial blower that forces air along the stator to maintain winding temperature during continuous duty cycles. Position and velocity are monitored through digital servo feedback, enabling the drive to close precise speed and torque loops. Flexible installation is supported by flange and foot mounting, so the unit can be secured either on a base plate or directly to a machine wall. For wiring, three-phase power enters from the right side, and the junction box is located on the top of the frame for convenient access in tight enclosures. This layout helps keep cable routing accessible when the motor is mounted close to surrounding machine structures. Standard bearings manage radial loads during operation.

Electrical conductors terminate in a junction box that isolates live connections and simplifies cable access. The length code C indicates the stator stack depth used to achieve the motor's power rating without enlarging the footprint. The rotor carries a smooth shaft without a shaft seal, and the opposite face is supplied without a shaft end, so no line shaft or encoder is fitted on side B. Because the motor is supplied without a holding brake, any static load retention must be provided by external mechanical means. The motor is rated for S1 duty, supporting continuous operation at nominal speed. It uses winding code BS, which matches the impedance expected by compatible 2AD drives for correct current limiting.