Product Description:

The 2AD200C-B35OR1-AS07-C2N1 is an AC induction motor supplied by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It delivers three-phase torque to conveyor drives, metal-cutting equipment, and general production machinery where continuous rotation and high starting torque are required. By pairing a squirrel-cage rotor with stator windings optimized by the manufacturer, the unit converts electrical energy into mechanical power for closed-loop automation that requires consistent speed and durability.

Cooling is provided by an axial blower mounted at the non-drive end, and this forced airflow keeps the stator temperature within the permissible insulation range during long duty cycles. Position and speed data are returned through digital feedback with a multi-turn absolute encoder, enabling the connected drive controller to track rotor angle over multiple revolutions without homing routines. Mechanical integration is flexible because the housing supports flange and foot mounting, allowing either face or base fixation on the machine frame. Power conductors enter through a cast-on junction box, which simplifies conduit routing and shielding. Torque is transmitted by a smooth shaft with a shaft seal that helps block lubricant leakage while accommodating close-fit couplings.

Application constraints that require passive stop mechanisms must be handled externally, as the motor is delivered without a holding brake. The frame follows size code 200 with length code C, so dimensional clearances match other IEC-compatible machines of the same output class. Mains leads enter from the right, and the connector plane is on the top of the stator for overhead entry. The opposite end is supplied without a shaft end. Standard-grade bearings support the specified radial forces, and vibration grade R limits displacement under load. The motor uses winding code AS for this thermal profile.