Product Description:

The 2AD200C-B35OR1-AS03-A2N3 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Intended for machine tools, packaging lines, and handling modules, it converts three-phase electrical power into controlled rotary motion for spindles and feed axes. By using the series’ standardized frame and electrical interface, the motor can be paired with compatible drive controllers to deliver constant torque over a wide speed range in automated production cells.

Cooling is supplied by a front-mounted axial blower that directs airflow along the housing to keep the stator below its thermal limit during continuous duty. The frame corresponds to size code 200, while length code C corresponds to the active core depth that supports continuous torque capability. The housing supports flange and foot mounting, so it can bolt to a face plate or rest on a base rail without adapters. Incoming power enters through a top-side junction box, and the conduit exits to the right to simplify cable routing in vertical cabinets. Rotor position and speed are delivered by the integrated high-resolution motor feedback sensor, which supports tight current vector control. Standard bearings carry radial and axial loads, the unit is supplied without a holding brake to reduce rotating mass, and the B-side is left without a shaft end for compact rear clearance.

The motor uses winding code AS, which matches its impedance to drives in the same voltage class. A smooth shaft without a seal is fitted on the drive side to allow direct coupling to precision hubs and to minimize friction losses. Because no seal is present, external protection against coolant splash is required when fluids are present. Vibration grade S1 limits residual imbalance and supports accurate machining at elevated speeds.