Product Description:

The 2AD200C-B35OR1-AS03-A2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. When paired with a compatible drive, it converts three-phase electrical power into regulated rotary motion for tasks such as material removal, press feeding, and gantry positioning. Its electromagnetic design helps keep speed stable under changing loads, allowing automated lines to maintain throughput and accuracy throughout demanding shifts. It is intended for industrial motion systems in which the inverter manages current, slip, and speed so the motor can follow process demands with consistent rotation. This operating profile suits machine sections that need steady torque delivery during long cycles as well as controlled response during acceleration and deceleration.

Cooling air is supplied by an axial blower mounted on the housing end, keeping winding temperatures within safe limits during continuous duty. Mechanical installation is flexible because the frame supports flange and foot mounting, letting builders bolt the unit to faceplates or machine beds. The output shaft is machined as a smooth shaft without a shaft seal, so torque is delivered through external couplings without seal friction. Rotor position and speed are captured by high-resolution motor feedback, enabling precise vector control at low frequencies. Inside, the rotor runs on standard bearings selected for long life under combined radial and axial loading.

The motor uses size code 200 with length code C, a combination that indicates its frame scale and core length for matching the motor to different loads. Electrical power enters through a top-mounted junction box power terminal oriented to the right of the drive end, which can simplify cable routing when conductors approach from above. The terminal arrangement keeps the power connection enclosed at the motor housing rather than using a separate cable outlet. The unit is supplied without a holding brake and without a shaft end on side B, so stopping and holding force must come from the drive or the machine mechanism. The assembly meets vibration grade R, supporting smooth operation during high-speed machining, and the AS winding code matches the standard voltage group used across the 2AD family.