Product Description:

The 2AD200C-B35OB6-AS03-B2V1/S036 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Intended for industrial automation, the unit converts electrical energy into controlled rotary motion for machining centers, packaging lines, and material-handling axes. Its design supports integration with compatible drive controllers and provides the mechanical interface needed for common machine installation arrangements. It is suited to applications that require stable torque, repeatable speed control, and reliable operation over long duty cycles.

Internally, the rotor spins on heavy-duty bearings that tolerate radial and axial loads in high-cycle production. Cooling is performed by a radial blower that forces air across the stator housing, keeping winding temperatures within safe limits during sustained torque delivery. Position and speed data are supplied by the high-resolution motor feedback encoder, enabling tight current loops in the drive controller and steady regulation during changing load conditions. The motor has a size code of 200 and a length code of C, which helps when checking machine clearances. Mechanical attachment uses flange and foot mounting, so the same frame can be secured to a machine bed or bolted to a gearbox.

The unit is supplied without a holding brake, so any static load retention must be achieved through external mechanisms or drive torque. Electrical power reaches the stator through a top-side junction box, and the conductors exit toward side B to suit rear cable routing while keeping the connection area accessible above the machine base. The vibration grade is R, indicating balanced operation for moderate speed ranges, while the shaft is balanced with its full key and delivered without a seal to minimize friction. The opposite end is supplied without a second shaft end, which supports single-ended coupling. The stator winding uses code AS, which helps match the motor to a compatible inverter.