Product Description:

The 2AD200C-B35OB2-AS03-C2V2 is an AC induction motor produced by Bosch Rexroth Indramat and grouped within the 2AD 3-Phase Induction Motors series. Intended for automated machine tools, packaging lines, and general material-handling equipment, the unit converts three-phase electrical energy into continuous mechanical rotation that can be regulated by a compatible drive controller. Its housing supports combined flange and foot interfaces, allowing installation on base plates or end shields while preserving existing machine layouts. This arrangement also suits retrofit applications where the mounting geometry must remain consistent.

Thermal control is provided by an integrated axial blower that forces cooling air through the stator vents, allowing the motor to sustain rated output even when the shaft turns slowly. Position and speed are relayed to the drive through high-resolution motor feedback, giving the control loop fine incremental data for stable velocity and torque regulation. Installation flexibility is enhanced by flange and foot mounting, so the motor can be secured by either interface without extra adapter hardware. Incoming power is terminated in a top-oriented junction box, which provides a sealed chamber for line and grounding conductors. Output torque is delivered through a smooth shaft with a shaft seal, which helps retain lubricant in the bearing area while limiting dust or coolant entry.

The rotor runs on heavy-duty bearings, allowing the motor to handle radial and axial loads from belts or couplings during continuous operation. Because the motor is supplied without a holding brake, any static holding function must come from the drive or an external clamp. The motor uses size code 200 for the frame envelope used in the 2AD family, and it is balanced to vibration grade S to reduce oscillation and noise during operation. This balance quality supports smoother running in applications that require stable continuous rotation.