Product Description:

The 2AD200C-B35OB2-AS03-A2N1 is an AC induction motor produced by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. In automated plant machinery, it converts electrical energy into rotational motion for pumps, gantries, and material-handling axes that require constant-speed duty. A standard set of deep-groove bearings supports the rotor, while the motor’s C length and 200 frame size establish its mechanical envelope within the series.

Internal heat is removed by a forced-air system that uses an axial blower, allowing continuous operation at rated load without external cooling devices. Position and velocity are relayed to the drive controller through high-resolution motor feedback, enabling tight speed control in closed-loop applications. Installation is flexible because the housing provides flange and foot mounting surfaces that suit both base-plate and end-shield layouts. The machine depth corresponds to length code C, and the stator diameter follows frame code 200, which helps match compatible couplings and guards. Power conductors enter a top-side junction box, simplifying cable routing when the motor is placed low in a cabinet or on a skid.

The mechanical interface is tailored for line-coupled drives: the rotor exits the drive end with a smooth shaft without a shaft seal, and the opposite side is manufactured without a shaft end to minimize overhang mass. Stator windings follow code AS for coil pitch and impedance, while vibration grade R keeps displacement within ISO industrial limits. Electrical leads are oriented on side B, and the box itself sits on the top of the frame to clear floor obstructions. For systems that rely on dynamic braking torque from the inverter, the motor is supplied without a holding brake, eliminating brake-release circuitry and reducing maintenance parts.