Product Description:

The 2AD200C-B35OB1-AS07-C2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In automated cells, this motor supplies continuous rotary power to spindles, material-handling axes, and other drive points where three-phase mains are converted into controlled mechanical motion. It couples to an Indramat inverter for vector control, enabling speed and torque regulation that matches process demands in machining, packaging, and general factory automation where stable output is needed during long operating cycles.

An axial blower forces air along the frame to keep the stator below its thermal limit, and this arrangement helps maintain cooling even when shaft speed is low. Closed-loop operation uses digital feedback with a multi-turn absolute encoder, supplying precise position data over multiple revolutions. The size code 200 denotes a large stator diameter that produces higher base torque than smaller 2AD units. Machine integration is simplified by flange and foot mounting, letting the housing bolt to a wall or bedplate. Incoming power enters through a junction box on the top of side B, keeping terminals accessible while clearing them from coolant spray. Standard bearings support the rotor, and the C length code indicates the active core depth.

Output torque is delivered through a smooth shaft with a shaft seal, preventing oil migration while accommodating keyed or friction couplings. The opposite face is supplied without a shaft, so only one mechanical interface is exposed, and single-ended construction can simplify coupling layout around the drive end. Dynamic balance is set to vibration grade R, limiting oscillation that could transfer into precision tooling. Electrical performance is tied to winding code AS, matching the inductance and resistance values expected by compatible Indramat drives. Because the motor ships without a holding brake, stationary load retention must be provided externally when power is removed.