Product Description:

The 2AD200C-B35OB1-AS06-B2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. The product functions as a three-phase motor that converts electrical energy into shaft torque for conveyor drives, spindle packages, and general motion axes used in automated cells. Its construction follows a standard induction motor platform, so it can be combined with drive controllers, overload protection, and position feedback to form a complete motion system in industrial automation.

Heat removal is handled by an axial blower, which channels air along the frame to maintain permissible winding temperatures during continuous duty. Rotor position is reported through digital servo feedback, giving the drive precise speed information for vector or sensor-based control. The motor has a size code of 200, which indicates the stator diameter. It also has a length code of C, which refers to the active core depth so the motor can fit available space while supporting the required torque output. The motor uses flange and foot mounting, enabling either face mounting on gearboxes or base bolting to structural members. Standard bearings support medium radial loads, and winding code AS identifies the conductor pattern selected for the required voltage and frequency range.

Electrical power is introduced through a junction box located on the housing, and the terminals are oriented on side B so cable routing can be kept away from the driven equipment. The box sits at the top of the frame, an arrangement that works with the blower airflow path. The motor is built without a holding brake, making it suitable for continuous-running axes that stop through drive torque or external mechanisms. The shaft has no secondary shaft end, it does not include a shaft seal, and it is balanced with the entire key to reduce residual vibration. Dynamic behavior is classified under vibration grade R, aligning the rotor balance with machinery that follows ISO medium-precision limits.