Product Description:

The 2AD200C-B35OB1-AS06-A2V1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Designed as a main drive element, it converts three-phase electrical power into controlled mechanical rotation that moves production equipment, packaging machines, and transfer lines. By supplying continuous torque while accepting closed-loop speed commands from a drive controller, the motor serves as a reliable drive unit in automated cells that operate under variable load conditions.

Its mechanical core is supported by heavy-duty bearings that tolerate significant radial and axial forces generated by belts or direct-coupled loads. Heat is removed by an integral axial blower, allowing the stator to remain within its thermal class during extended duty cycles. Machine builders can place the housing on a frame or a bulkhead because the casing is prepared for flange and foot mounting. The stator diameter indicated by size code 200 provides a large magnetic cross section for higher torque density, while the length designation C identifies the active stack depth. Incoming power lands at a top-mounted junction box, and the terminal orientation faces side B so cable runs stay clear of the driven shaft. A shaft end is omitted on side B to shorten the overall package.

Position and speed are reported through digital servo feedback, enabling high-resolution control without extra sensors. The drive interface recognizes the motor’s electromagnetic design through winding code AS, so current limits match the copper profile. Mechanical output is delivered through a smooth shaft without a shaft seal, and the assembly is supplied without a holding brake, permitting free coasting when power is removed. Dynamic behavior is classified under vibration grade R, and all electrical terminations exit on side B, consistent with the specified power connection direction.