Product Description:

The 2AD200C-B35OB1-AS03-H2N2 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As an induction machine, it supplies continuous rotary power to automated machinery such as printing presses, gantry axes, or material-handling stations where high uptime and straightforward maintenance are priorities. It is intended for applications that need dependable continuous-duty output and stable operation under changing mechanical loads. Its frame follows the series coding, and it is shipped without a holding brake, so static position retention must be handled by the drive or an external lock.

The housing is force-ventilated by an axial blower that moves air along the stator to control thermal rise during sustained duty cycles. Position and speed are relayed to the drive through high-resolution motor feedback, enabling tight regulation in closed-loop applications and accurate response during speed changes. The motor uses motor size code 200 and supports flange and foot mounting, giving flexibility when aligning the shaft to gearboxes or belt pulleys. Electrical power enters through a junction box on side B, and the box is mounted on the top of the frame for unobstructed cable routing inside a cabinet. This placement helps keep the cable path clear when the motor is installed close to surrounding machine structures. The assembly uses standard bearings and a C-length stator stack to balance torque with overall motor mass.

The drive end uses a shaft seal with half-key balancing configuration to limit oil ingress and keep residual imbalance low during high-speed operation. On the opposite side, there is no shaft extension, which simplifies couplings that require only one active end and leaves the non-drive end mechanically uncluttered. The motor has vibration grade S, and the stator uses winding code AS for its copper layout.