Product Description:

The 2AD200C-B35OB1-AS03-D2V1 is produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It serves as a drive element for automated machining centers, packaging equipment, and material-handling lines where steady torque and closed-loop speed regulation are required. The motor operates as an AC machine that develops torque by induction without mechanical commutation, and it works with external frequency converters and motion controllers to deliver consistent rotary power to connected loads. Its induction design also suits continuous industrial operation where dependable speed control and stable output are required over long running periods.

The unit employs heavy-duty bearings to support radial and axial stresses. Cooling is provided by an axial blower that forces air along the stator housing to carry heat away from the motor body during operation. The motor is supplied without a holding brake, so load retention during power-off must be handled externally. Power enters through a top-mounted junction box, and the leads exit toward Side B for rearward cable routing. Rotor position is captured by a high-resolution motor feedback system, enabling fine velocity and position control through the connected drive. The motor uses vibration grade R, which indicates reduced vibration limits for precision machinery. The non-drive end carries no shaft end, leaving space for the blower assembly at the rear of the housing.

The motor uses flange and foot mounting, so it can align to a gearbox pilot diameter or bolt to a baseplate. The drive end includes a shaft seal, which helps protect the bearing area from dust and light contamination near the coupling. Frame size 200 with the C length code indicates a motor body intended for mid-range torque duties in industrial machinery. Internally, winding code AS identifies the conductor cross-section and turn count selected to match the thermal limits of the blower-ventilated housing and the voltage range of standard 3-phase inverters.