Product Description:

The 2AD200C-B35OB1-AS03-C2V1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. In automated lines, it delivers constant rotary power for conveyors, presses, and other equipment that require mains-driven torque conversion from electrical to mechanical energy. High positional accuracy is supported by integrated high-resolution motor feedback, allowing the drive controller to monitor rotor angle for vector control and stable speed regulation. Because the feedback is integrated in the motor housing, the control system receives position information without a separate external sensor assembly.

This motor employs an axial blower to push cooling air along the stator length, maintaining temperature during continuous duty. It can be secured through flange and foot mounting, giving flexibility when aligning the drive train. The motor uses frame size 200 with the compact C length variant, so it balances power density with installation space. A vibration grade R balance quality helps support smooth running. Mechanical energy is transmitted through a smooth shaft with a shaft seal, and the seal restricts lubricant loss and contaminant ingress. This arrangement supports installation on machine plates or base structures without changing the basic motor housing. The motor is supplied without a holding brake, so external stopping devices must manage standstill security. Power enters from the top on side B through a junction box, and conductors are routed away from moving parts.

The rotor is supported by heavy-duty bearings that tolerate radial forces typical of belt transmissions and help support long service intervals. The motor uses winding code AS, which pairs the stator with specific inverter voltage and frequency ranges. The rear face is delivered without a shaft end, preventing attachment of secondary couplings and reducing mass on side B. This arrangement leaves the drive end as the only mechanical output point, which can simplify coupling layout in applications that do not need a second shaft extension.