Product Description:

The 2AD200C-B35OB1-AS03-B2V1 is an AC induction motor from Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series. It supplies rotational power for automated conveyors, presses, and material-handling axes by converting three-phase electrical input into controllable shaft torque. The motor combines the stator, rotor, and forced-air components in one housing that mounts to machine frames through combined flange and foot interfaces. In typical operation, it is paired with an inverter that adjusts frequency and voltage so the shaft can deliver controlled speed over a broad operating range.

Mechanically, the motor uses heavy-duty bearings to support the radial and axial forces created by large couplings. Its frame uses motor size code 200, and the C length provides the continuous torque capacity needed for mid-range drives. Installation flexibility is provided by flange and foot mounting, allowing either face or base attachment without extra brackets. Dynamic behavior is controlled by vibration grade R, which helps maintain alignment during long operating cycles. The output shaft is supplied without a shaft seal, and it is factory balanced with a full key for coupling installation.

Thermal management relies on axial blower cooling, which moves air along the housing to remove stator heat during continuous duty. Position and speed feedback are provided by high-resolution motor feedback, allowing tight velocity regulation and stable vector control. Line conductors terminate in a junction box power connection mounted on the top of the frame and facing side B, which helps keep cable routing direct. The stator uses winding code AS, matching the electrical characteristics to standard 400 V inverters. The motor is supplied without a holding brake, and the side B end has no shaft extension so the overall length stays shorter where a rear output is not needed.