Product Description:

The 2AD200C-B35OA1-AS07-D2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. This unit converts three-phase electrical power into continuous torque, making it suitable for automated conveyors, packaging stations, and material-handling axes that require dependable rotation and moderate dynamic response. The C length code indicates the housing depth used for this frame, and the AS winding matches the stator to standard drive controllers. When used with closed-loop controls, the motor can maintain stable speed across a broad load range during continuous industrial operation.

The motor uses an axial blower mounted on the rear to force air through the housing fins, so internal copper and iron temperatures remain below thermal limits during sustained duty. This forced airflow supports operation when thermal load is higher than a naturally cooled housing would allow. Position data are returned through digital feedback with a multiturn absolute encoder, allowing the drive to determine shaft angle after power-up without a homing cycle. Mechanical installation uses flange and foot mounting, and incoming power is routed to Side A through the junction box on top of the frame to keep high-voltage cabling separated from feedback lines and coolant pipes.

The motor is supplied without a holding brake, so any static load must be secured by drive torque or an external clamp when the unit is de-energized. A protective shaft seal surrounds the keyed output to limit the entry of oil or dust during operation, and the motor uses standard bearings for general service conditions. The unit has a motor size code 200, which matches the dimensions used for this frame, and it is balanced to vibration grade R for smooth running. There is no shaft end on side B, which leaves the non-drive end without a secondary output extension.