Product Description:

The 2AD200C-B35OA1-AS07-C2N1 is an AC induction motor built by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It serves as the prime mover in automated production lines, supplying constant torque and speed to machine tools, printing cylinders, or material-handling stations that require three-phase power conversion and closed-loop velocity control. Standard bearings are fitted to support radial and axial loads generated by drive belts or couplings.

The motor uses an axial blower mounted on the housing to move cooling air along the stator and end windings, allowing the 200 frame size to dissipate heat without external ducting. The internal rotor is balanced to vibration grade R, so dynamic motion does not transmit excessive oscillation to adjacent machine structures. Position feedback is provided through digital feedback with a multi-turn absolute encoder, enabling a drive controller to read exact shaft angle over multiple revolutions. Mechanical installation is simplified by flange and foot mounting, giving builders the option to bolt the case to a frame plate or a shaft-centered flange. Power leaves the unit through a smooth shaft with a shaft seal, which helps block lubricant and airborne contaminants from entering the motor cavity and allows direct coupling to a gearbox or driven pulley.

The electrical interface is routed through a junction box that sits on the top of the stator housing, with conductors exiting on side A so cabinet wiring can remain low and protected. Because the motor is supplied without a holding brake, applications that need static load retention must rely on external clamping devices or drive torque at zero speed. The rotor-to-stator geometry follows winding code AS for its voltage and current profile, and the assembly length is identified by motor length code C, giving additional iron depth for higher continuous power. The rear face is manufactured without a shaft end on side B, which reduces overall length when the motor is seated against a bulkhead.