Product Description:

The 2AD200C-B35OA1-AS07-A2N1 is manufactured by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. It is used as the prime mover in automated presses, material-handling lines, and packaging modules where steady three-phase torque is required. By converting electrical input into continuous rotary motion, the motor links programmable drives to mechanical loads and supports precise speed control throughout an industrial duty cycle. This makes it suitable for equipment that must accelerate and hold speed under changing process loads.

This unit is supplied without a holding brake, so braking torque must be provided by the inverter or by external clamping devices. Thermal limits are managed by an internal axial blower that forces ambient air through the stator ducts for constant cooling. Position data is generated by digital feedback with a multi-turn absolute encoder, enabling the controller to restore the exact rotor angle after power loss. Installation flexibility comes from flange and foot mounting, so the frame can be bolted either to a machine wall or to base rails. The housing uses motor size code 200, matching the frame dimensions of this motor family. Standard bearings support the shaft under radial and axial loads without requiring special options.

Extended stator iron associated with length code C increases continuous torque capability while keeping the same flange pattern. Power conductors reach the stator windings through a junction box oriented on Side A and located on the top of the housing, which can simplify vertical cable routing. Dynamic performance complies with vibration grade R, limiting oscillations that could shorten bearing life. The motor is an AC induction type with winding designation AS for its conductor layout. It has a smooth shaft without a seal on side A, while side B is supplied without a shaft end.