Product Description:

The 2AD200C-B35OA1-AS06-D2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In automated assembly lines, conveyors, and machine tools, the motor converts electrical energy into continuous mechanical rotation that can be directly coupled to gearboxes or driven equipment. With a three-phase stator layout and a squirrel-cage rotor, the unit fits control architectures that require simple torque regulation from frequency inverters and serves as a primary drive element in industrial motion systems. Its induction design is well suited to applications that need steady rotary output over long operating cycles.

Thermal management is handled by an integrated axial blower that moves air along the housing to remove heat produced by the stator windings during sustained load. Position and speed are reported to the drive through digital servo feedback, allowing closed-loop regulation without external encoders. The frame uses size code 200 and length designation C, so the active iron stack provides medium torque capacity within the family. The motor uses flange and foot mounting, enabling installation on vertical plates or base rails, while standard bearings support the rotor and the sealed shaft is dynamically balanced with the full key to reduce runout and help prevent lubricant loss.

Power enters the stator through a top-mounted junction box, and the cables approach from side A to keep terminals clear of adjacent equipment. The motor is supplied without a holding brake, so stopping torque must be provided by the drive or by external machine hardware. Vibration grade R matches the balanced shaft and the absence of a shaft extension on side B for smoother operation. The motor uses winding code AS, which corresponds to a fixed resistance and inductance profile for parameter entry in the connected drive.