Product Description:

The 2AD200C-B35OA1-AS06-B2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into rotational torque for conveyors, pumps, and other automated equipment, supplying steady output for industrial processes that rely on continuous motor operation. Its AS winding code is intended for medium-to-large duty applications where precise speed regulation and dependable service life are required. The motor is built for installations that need reliable torque delivery over long operating periods.

Thermal loading is controlled by an integrated Axial Blower that drives air along the housing to remove heat from the stator laminations. Position and speed data are transmitted through Digital servo feedback, enabling a compatible drive to close the control loop with high resolution and stable response during acceleration or speed changes. This feedback arrangement also supports precise monitoring of rotor position at low and changing speeds. Because the motor ships without a holding brake, mechanical locks or drive torque must secure the load after mains power is removed. The 200 frame and C-length stator stack provide a large active iron section for this footprint. Installation versatility is provided by Flange and foot mounting, so the motor can be fastened to a base plate or directly to a vertical panel with standard mounting hardware.

Power enters through a sealed Junction Box mounted on the Top of the frame, and the cable glands face Side A to align with overhead wiring trays. The drive-end shaft is supplied without a shaft seal and is balanced with the entire key to minimize radial runout during operation. The non-drive B-side has no shaft extension, which helps reduce overall length and keeps the rear profile compact. Rotor motion complies with vibration grade R, limiting displacement and protecting the encoder during load fluctuations.