4.95 based on 202 reviews

🙶 Great service, they have the parts i needed in stock. 🙷

2AD200C-B35OA1-AS06-A2N1 Bosch Rexroth Indramat

MPN: R911284577

No Tariffs On US Orders
  • Rated 4.6 (62 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Ask for Availability

Current response time:
3 Minutes 44 Seconds

Preparing your secure checkout page...

The Bosch Rexroth Indramat 2AD200C-B35OA1-AS06-A2N1 is an AC induction motor from the 2AD 3-Phase Induction Motors series. It features standard bearings, a smooth shaft without seal, and utilizes an axial blower for cooling. The motor is designed for flange and foot mounting, comes without a holding brake, and provides digital servo feedback.

Quote Request Form:

Warranty
Wake Industrial Warranty

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The 2AD200C-B35OA1-AS06-A2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into steady mechanical rotation for conveyors, presses, and other automated stations that require reliable continuous duty. When connected to a compatible drive controller, the motor supports closed-loop speed regulation that is essential for repeatable process cycles in industrial automation. This arrangement allows stable output during both acceleration and constant-speed operation.

For mechanical restraint, the unit is supplied without a holding brake, so stopping torque must be provided by the drive or the load itself. Thermal management is handled by an integrated axial blower cooling assembly that forces air through the frame to keep winding temperature within operating limits. Rotor position is monitored through digital servo feedback, allowing the controller to correct slip that is typical of induction machines. The housing follows motor size code 200, which gives it a stator diameter suited to mid-range power demands. Installation flexibility comes from flange and foot mounting points that accept either plate or base attachments. Standard rolling bearings support the shaft, the power conductors leave on side A, and a top-mounted junction area keeps cables clear of floor-level debris.

The active iron length is indicated by motor length code C, which corresponds to the stack height and continuous torque capability. Winding selection is identified as AS, matching the motor to standard drive voltages and magnetizing currents. Connections are made inside a sealed junction box that sits on the top of the frame for easy access. The output end uses a smooth shaft without a shaft seal, so any environmental sealing must be provided externally, and the rear face is made without a shaft end to allow compact fan or gearbox coupling. Operating balance conforms to vibration grade R, which helps limit frame oscillation during service.

Bearings
Standard
Brake
Without holding brake
Cooling Type
Axial Blower
Feedback Device
Digital servo feedback
Motor Length Code
C
Motor Size Code
200
Mounting
Flange and foot mounting
Power Connection Direction
To Side A
Power Connection Position
Top
Power Connection Type
Junction Box
Product Type
AC Induction Motor
Shaft End (Side B)
Without shaft end
Shaft Type
Smooth shaft without seal
Vibration Grade
R
Winding Code
AS
  • 2AD200C B35OA1 AS06 A2N1
  • 2AD200C-835OA1-AS06-A2N1
  • 2AD200C-B350A1-AS06-A2N1
  • 2AD200CB35OA1AS06A2N1
  • 2AD2OOC-B35OA1-ASO6-A2N1
  • 2AD2OOC-835OA1-ASO6-A2N1
  • 2AD200CB350A1AS06A2N1
  • 2AD2OOCB35OA1ASO6A2N1

Frequently Asked Questions about 2AD200C-B35OA1-AS06-A2N1:

Q: What cooling method is used in the 2AD200C-B35OA1-AS06-A2N1 motor?

A: This model utilizes an axial blower for cooling, ensuring consistent temperature control during operation.

Q: What type of feedback device is included with the 2AD200C-B35OA1-AS06-A2N1 motor?

A: The motor is equipped with digital servo feedback to facilitate precise control and monitoring.

Q: Does the 2AD200C-B35OA1-AS06-A2N1 have a holding brake?

A: It does not include a holding brake, making it suitable for applications where dynamic braking is not required.

Q: Where is the power connection located on the 2AD200C-B35OA1-AS06-A2N1 motor?

A: The power connection is positioned on the top of the motor and is accessible on Side A via a junction box.

Q: What mounting options are available for the 2AD200C-B35OA1-AS06-A2N1 motor?

A: This model features flange and foot mounting for flexible installation options.


Internal Product Review

  • ‘‘The 2AD200C-B35OA1-AS06-A2N1 is a Bosch Rexroth Indramat AC induction motor with flange and foot mounting for flexible machine integration. Axial blower cooling and digital servo feedback support stable thermal behavior and accurate drive control in demanding applications. A top-mounted junction box simplifies power routing and rounds out a well-configured motor package.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo