Product Description:

The 2AD200C-B35OA1-AS03-C2V2 AC induction motor is manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It supplies rotary power to spindle drives, conveyors, and processing stations that demand steady three-phase torque. As a standard induction design, it generates motion through electromagnetic slip rather than permanent magnets, allowing high duty cycles and straightforward integration with Indramat drive controllers for closed-loop automation. This operating principle supports stable speed control when process loads change during operation.

The rotor is supported by heavy-duty bearings that accommodate elevated radial and axial forces during continuous industrial use. Heat is extracted by an internal axial blower that moves air along the stator housing and helps carry thermal energy away from the windings. Shaft position is tracked with high-resolution motor feedback, enabling the controller to correct speed deviations with very fine electronic resolution. The frame uses flange and foot mounting, so the motor can be secured by face mounting or base mounting to suit the machine layout. Power conductors exit toward Side A, and the sealed junction box protects terminals from oil and dust. The enclosure uses motor size code 200, which provides a large stator bore for higher torque capacity in this frame class.

A smooth shaft with a shaft seal transmits torque while helping prevent grease migration, and the unit is supplied without a holding brake, so external locking devices must secure static loads. Vibration grade S limits oscillation levels at the mounting face, which helps protect adjacent precision equipment. Winding code AS indicates the electrical winding arrangement used with standard Indramat inverters. The junction box is mounted on the top of the housing to shorten vertical cable runs, side B is supplied without a shaft end for close-coupled gear stages, and length designation C sets the overall stack height within the 200-frame envelope. This layout leaves the non-drive side clear when compact mechanical integration is required.