Product Description:

The Bosch Rexroth Indramat 2AD200C-B35OA1-AS03-B2V1 belongs to the 2AD 3-Phase Induction Motors series and functions as a drive element for automated tooling stations, presses, and conveyors. As an AC induction motor, it converts three-phase electrical power into the mechanical torque needed to move loads under closed-loop control from a servo drive. Industrial users select this model when they require a compact, foot-and-flange compatible motor with integrated feedback for coordinated motion.

The motor carries heavy-duty bearings that support radial forces produced by belts or gear couplings. Cooling air is pushed through an axial blower, allowing the stator to remain within its thermal limits at continuous current. Position and speed are monitored by a high-resolution motor feedback device, so the drive can regulate flux even during rapid load changes. The housing corresponds to motor length code C and frame size code 200, a combination tied to the active iron length and overall torque density. Mechanical installation is simplified through flange and foot mounting points, letting the unit be secured to a base plate while keeping the shaft aligned. Power leads enter on Side A from a top-mounted opening, keeping cable bends short and away from coolant lines.

Screw terminals inside a junction box provide the main connection, and the cover faces upward for easy inspection after the motor is in place. The rotor is balanced with the entire key, and there is no shaft seal; this design minimizes additional mass while still meeting vibration grade R for smooth operation. A winding code of AS identifies the conductor cross-section and insulation scheme used in the stator, which helps with drive parameter selection. Because the unit is supplied without a holding brake and without a shaft end on Side B, external mechanics must provide static load support or secondary drive coupling.