Product Description:

The 2AD200C-B35OA1-AS03-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As an induction unit, it converts electrical energy into torque for conveyors, pumps, and other continuous-duty axes found in automated lines. It relies on drive torque or external clamping when motion must be held. Its role in industrial automation is to provide sustained rotary power while accepting closed-loop commands from a compatible drive.

Cooling air is forced through the housing by an internal axial blower, a method that keeps stator temperatures within permissible limits during high-load cycles. Position and speed are returned to the controller through high-resolution motor feedback, allowing fine velocity regulation. The motor uses motor size code 200, which corresponds to this frame's flange dimensions and shaft height. Installation versatility is provided by flange and foot mounting points, enabling either face or base attachment. Power conductors terminate in a sealed junction box, which supports grounded cable glands and strain relief while keeping live parts enclosed.

The motor uses motor length code C, which indicates the stack depth and influences continuous torque. Cables enter from the top of the housing and route to side A, which helps keep conduit paths orderly with minimal crossing. The machine is supplied without a holding brake, so zero-speed holding must come from the drive or external locks. Standard deep-groove bearings support the rotor, and the shaft is balanced with its full key but runs without a shaft seal, making it appropriate for dry indoor environments. Vibration grade R limits peak displacement, the winding code AS sets the copper fill and insulation arrangement, and the absence of a secondary shaft end simplifies coupling alignment.