Product Description:

The 2AD200C-B35LL1-AS07-B2N1 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a rotary drive element, it converts electrical energy into mechanical torque for automated machine axes, conveyors, and tooling stations that rely on constant-speed operation. Its stator windings, rotor, and integrated ventilation work with compatible control drives from the same platform so that the assembly delivers repeatable torque in industrial automation cells.

The unit is built on frame size 200, and its length version C provides additional stack depth for higher thermal capacity without altering the shaft height. An axial blower attached to the housing moves air along the stator channels, helping dissipate heat during continuous-duty cycles. It can be installed using flange and foot mounting, making it suitable for base plates or end-shield brackets. Position and speed are reported through digital feedback with a multiturn absolute encoder, allowing the drive controller to recover absolute rotor position after power loss. The motor’s copper pack follows winding code AS, giving resistance and inductance values that are compatible with Indramat drive inverters.

Because the motor is supplied without a holding brake, axis retention must be handled by the external drive or a mechanical lock. Power enters from the left through a junction box that is oriented to the left side when the observer faces the shaft, which matches the stated connection direction and position and simplifies cable routing in machine layouts. The shaft is machined without a shaft seal and balanced with the entire key, and there is no shaft end on side B, which reduces axial length where a through-shaft is not needed. Operating smoothness is verified against vibration grade R, while the standard radial bearings support the rotor under dynamic loads.