Product Description:

The 2AD200C-B35LB3-AS03-A2N1 is an AC induction motor produced by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. Within an automation cell, this motor converts electrical energy from a matched drive into continuous rotary motion for pumps, spindles, and material-handling axes where speed regulation rather than positional indexing is the primary requirement. Standard bearings are fitted to handle radial loading typical of belt drives without special lubrication systems.

The motor uses a radial blower to force air across the housing, so internal winding temperature stays within limits even at sustained full load. Its frame diameter is coded as motor size code 200, giving a large stator cross-section that supports higher continuous currents. The overall stack depth follows motor length code C, a mid-range option that balances torque output and installation depth. Mechanical integration is flexible thanks to flange and foot mounting, allowing the same unit to bolt to a faceplate or rest on a machine base.

Electrical termination is through a junction box that is positioned to the left of the front face, with the conduit entry directed to Side B so cables clear adjacent equipment. Inside, the copper conductors use winding code AS, which matches the resistance and flux characteristics expected by Indramat drive modules. Motion data is captured by high-resolution motor feedback, enabling the inverter to hold speed accuracy despite load swings, and the motor is built to vibration grade R, which keeps rotor imbalance within limits for higher speeds. The rotor has a smooth shaft without a seal, simplifying coupling to precision clamping hubs, and the opposite end is supplied without a shaft extension. Because the unit is delivered without a holding brake, external means must provide static position retention.