Product Description:

The 2AD200C-B35LB2-BS06-C2V2 is an AC induction motor manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. With motor size code 200 and length code C, it uses a large frame suited to high-torque drive stations. In automated equipment, the unit converts three-phase electrical energy into continuous rotary motion for material transport, spindle rotation, and pump operation. Its operating role makes it suitable for applications that require steady speed control and dependable mechanical output over extended duty cycles.

Cooling is provided by an integrated axial blower, which forces air along the stator housing to control winding temperature during continuous duty. The rotor runs on heavy-duty bearings that tolerate elevated radial and thrust loads during demanding operation. The housing supports flange and foot mounting, allowing accurate installation on machine frames or base structures. Positional data is returned through digital servo feedback, allowing the drive to maintain stable velocity regulation without a separate external transducer. The motor is supplied without a holding brake, so any stationary load retention must be provided by the drive or by an external mechanical device.

Incoming power is terminated in a junction box located on the left side when the shaft faces forward, and the cable exit is oriented on side B for straightforward cable routing beside adjacent equipment. The output uses a smooth shaft with a shaft seal, which helps limit grease escape and helps block fine particulates from entering the bearing area. The rear of the rotor is built without a second shaft end, which shortens the overall motor layout at the non-drive side. Compliance with vibration grade S helps limit transmitted oscillation in precision installations. The BS winding code indicates the electrical characteristics expected by the matching drive system.