Product Description:

Bosch Rexroth Indramat manufactures the 2AD200C-B35LB2-AS06-C2V2 in the 2AD 3-Phase Induction Motors series. Classified as an AC induction motor, the unit converts electrical power into steady rotary motion for conveyors, spindles, and automated transfer axes that operate around the clock. Its frame follows motor size code 200, giving the housing enough cross-section for the magnetic circuit required by high-power industrial installations while remaining compatible with common machine layouts. This motor type is suited to applications that require reliable continuous rotation and stable speed behavior during long operating cycles.

The motor’s mechanical core is stabilized by heavy-duty bearings, permitting axial and radial loads from belts or gearboxes. An integrated axial blower moves cooling air over the stator so thermal limits are maintained during continuous duty. Rotor position is read by digital servo feedback, providing high-resolution data for vector control and accurate regulation during speed changes. Flexible installation is achieved with flange and foot mounting, allowing either face or base attachment. The driven side carries a smooth shaft with a shaft seal that blocks lubricant escape and eases coupling alignment. Power conductors exit on Side B at the left, and the service side has no second shaft end, which leaves the non-drive end clear for nearby machine components.

The drive system must manage stopping torque externally because the motor is supplied without a holding brake. Dynamic balance meets vibration grade S, limiting oscillation that could otherwise transmit to precision fixtures at high speed. The cast-on junction box provides finger-safe terminals and a protected entry point for the power leads. Electrical behavior also depends on winding code AS, which matches the motor’s stator characteristics to compatible 2AD drives so rated current, torque response, and power factor remain consistent across the operating speed range.