2AD200C-B35LB1-AS06-A2V1

Product Description:

The 2AD200C-B35LB1-AS06-A2V1 sits in the Bosch Rexroth Indramat lineup as part of the 2AD 3-Phase Induction Motors series. Here the frame size lands at 200 mm, which locks it into pretty serious machinery—big conveyors, presses, or even automated storage lifts. Power is always in the conversation, and this one usually brings 27 kW to the table, though sub-models might offer tiny tweaks on that. Top speed stays capped around 1500 rpm so the motor pushes steadily instead of racing ahead. For regular jobs, the rated torque comes out at 172 Nm, enough to lift a weighty workpiece or start up heavy tooling without a fuss.

The build is aimed at surviving in rough conditions, thanks to IP65 protection class. No dust leaks, and a quick washdown from a hose won’t bother the interior at all. Cooling control here uses surface cooling with a fan, which means a stream of air rides the housing and pulls away any heat buildup, perfect for hot factory lines where the tasks just stack up. Installation works best with the flange mounting style B35, letting the motor bolt down tight on work cells or drive arrays. Feedback tags along inside with a digital servo feedback channel and an incremental encoder—all this helps the drive keep tabs on position and speed, stopping drift and slips during runs.

Half industrial lines only work as well as their motion is tracked, and that's covered here through responsive control and that protected feedback. Housings get coated up to resist hits, grease spatters, and dust, lending more hours before maintenance interrupts production. The shaft relies on a standard output end setup, good for most pulleys or couplings straight off the shelf. At 172 Nm torque paired with 1500 rpm, it’s a fit for automated settings where every drive needs to show up shift after shift.