Product Description:

The 2AD184D-B35RC1-CS0D-B2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a three-phase squirrel-cage unit, it supplies continuous rotational power to spindles, pumps, and conveyor axes in automated equipment. Its housing format, extended active core, and integral axial blower help the machine deliver rated torque while remaining compatible with common drive packages. Standard bearings and encoder feedback allow direct use in closed-loop velocity or torque control on CNC and packaging lines.

Cooling is handled by an axial-flow blower energized with 400 V, forcing air along the frame fins to keep winding temperatures within limits. Position feedback is supplied by an incremental encoder with 2500 increments, giving the controller sufficient speed resolution for stable regulation. The motor uses flange and foot mounting, so it can be secured to a baseplate or attached directly to a machine face, and a cast-on junction box on the right side of the stator houses the main terminals for orderly cable entry. The designation motor size code 184 corresponds to the standard shaft height used for this housing.

Because the motor is delivered without a holding brake, static positioning must be maintained by the connected drive or by external locking hardware. Incoming power enters on side A through the right-hand junction interface, which supports uniform cable routing along the machine wall. Operational smoothness is supported by vibration grade R, which limits running irregularity and helps reduce stress on the bearings. The stator uses winding code CS, matching the electrical characteristics expected by compatible Bosch Rexroth drive modules. The shaft is balanced with its full key, has no shaft seal, and the rear face is closed because side B has no shaft end.