Product Description:

The 2AD184D-B35RC1-CS0D-A2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Designed as a drive element for automated machinery, the unit converts electrical energy into continuous rotational motion suitable for conveyor sections, gantry axes, and forming equipment. Its construction supports external forced ventilation to maintain rated torque, while encoder feedback allows the connected drive controller to supervise speed and rotor position during closed-loop motion sequences used in industrial automation.

Thermal management is provided by an axial blower mounted on the stator housing. This fan is energized from a dedicated 400 V supply, so airflow stays constant regardless of motor speed. The machine controller receives position data from an incremental encoder with 2500 increments, enabling precise velocity regulation and fault detection when running at low frequencies. With the mechanical frame identified by size code 184 and length code D, the motor fits applications that demand higher power density without increasing shaft height beyond standard IEC outlines. Standard-grade bearings support the rotor, and the CS winding configuration sets the voltage and current profile expected by Indramat inverters.

Installation flexibility comes from flange and foot mounting, allowing the housing to be bolted either to a base plate or directly to a machine wall. The power conductors terminate inside a top-mounted junction box that faces side A and sits on the right when viewed from the drive end, which helps simplify cable routing inside cabinets. Mechanical output is delivered through a smooth shaft without a seal, and no shaft is provided on the opposite B-side, reducing overall length. The motor does not include a holding brake, so torsional locking must be supplied externally, and the assembly conforms to vibration grade R for balanced operation in high-speed cycles.