Product Description:

The 2AD184D-B35OD1-DS06-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It serves as a rotary prime mover in automated machinery, converting three-phase electrical power into shaft torque for material handling, machining, and general motion tasks. The design supports integration with servo drives so that the controller can adjust speed and torque precisely during dynamic duty cycles. Its combination of frame size and length helps deliver high power density where installation space is limited.

Cooling relies on an axial blower that forces air along the stator housing, and the blower is rated for 400 V to match typical plant utility supplies. Electrical phase conductors terminate inside a sealed junction box, which helps protect terminals from contamination and keeps field wiring organized. Mechanical installation is flexible because the housing supports flange and foot mounting, allowing either end-bell attachment or base mounting without added adapters. For position and speed control, the motor incorporates digital servo feedback, providing high-resolution rotor data to the drive so that closed-loop regulation can respond quickly to changing load conditions.

The dimensional code identifies a frame built on the 184 size platform, which uses the shaft center height and mounting pattern associated with larger process-drive installations. The assembly ships without a holding brake, so stopping torque must be provided by the drive or by an external mechanism when power is removed. Dynamic behavior follows vibration grade R, which helps support smoother rotation at higher operating speeds. Service conductors enter the motor on side B, while the junction box exits at the top, helping keep cable routing clear of the mounting feet in vertical or horizontal layouts.