Product Description:

The 2AD184D-B35OD1-CS06-A2N1 is an AC induction motor produced by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. The unit converts three-phase electrical energy into shaft rotation for conveyor sections, gantry axes, and other automated machinery. This design is suited for installations that need stable speed control, consistent torque output, and compatibility with closed-loop drive systems. It is commonly applied where the motor must respond predictably to varying load conditions during repeated production cycles. Its frame size and internal winding are selected so that torque delivery matches standard drive ratings used in modular automation systems.

Thermal management is provided by an axial blower that operates from 400 V, forcing air along the stator housing to support continuous duty at rated current. Installation can use flange and foot mounting, giving flexibility when aligning the motor on machines with horizontal bearing plates or face-mounted connections. Power leads enter through a cast junction box located on the top of the housing, and the cables exit toward Side B so conduit can stay clear of moving parts. Winding code CS identifies the electrical configuration used for this motor. This housing arrangement helps keep wiring organized where cable routing space is limited. This cooling method avoids the need for a liquid chiller.

Position and speed are monitored through digital servo feedback, enabling closed-loop control without an external encoder. That arrangement supports feedback-based regulation for applications that need accurate speed response and controlled motion under changing process loads. The rotor is carried on standard bearings that meet DIN vibration limits, and the assembly is graded at R to limit displacement under load changes. Torque is transmitted through a smooth shaft without a seal, which reduces friction and suits applications that do not require shaft sealing. Because the motor is delivered without a holding brake, static positioning must rely on drive torque or an external brake. Size code 184 and length code D indicate the motor's basic dimensions for this frame.