Product Description:

The 2AD184D-B35OC1-DS06-A2N1 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Intended for machine tools, packaging lines, and transfer systems, it converts electrical energy into rotary motion that is regulated by an external frequency inverter. Digital feedback integrated in the motor allows the drive controller to close a precise speed loop, making the unit suitable for automated axes that must maintain constant torque under varying load.

Thermal management is handled by an integrated axial blower that is supplied with 400 V, so cooling air is delivered directly along the stator frame even when shaft speed is low. Position data reach the drive via digital servo feedback, which transmits high-resolution encoder signals for tight velocity control. Installation flexibility is provided through flange and foot mounting; this dual geometry lets the same frame fit base plates or end shields without additional brackets. Power enters on side A through a top-mounted junction box, simplifying cable runs inside vertical cabinets and keeping terminals accessible. The frame uses size code 184 and length code D, giving a continuous power envelope matched to mid-range production machinery.

Mechanical coupling is simplified by a smooth shaft without a shaft seal, eliminating keyways while keeping runout low for belt pulleys or shrink-fit hubs. Dynamic balance is classified as vibration grade R, so radial displacement remains within limits for high-speed cutting or indexing stations. The stator uses winding code DS, which matches the resistance and inductance expected by standard 400 V class inverters and helps avoid excessive reactive current. For applications that stop by drive torque alone, the motor is delivered without a holding brake, reducing weight when rapid emergency locking is not required.