Product Description:

The 2AD184D-B35OC1-CS06-B2N1 is a motor produced by Bosch Rexroth Indramat and part of the 2AD 3-Phase Induction Motors series. It converts three-phase electrical input into rotational output for automated conveyors, packaging lines, and forming equipment. The model code identifies the frame size, stack length, winding variant, and mounting arrangement, which helps match the motor to coordinated drive systems. Its overall configuration suits industrial applications that require steady operation and controlled speed behavior over long production cycles.

Thermal management is handled by an axial blower that operates at 400 V, forcing air across the housing to help maintain a stable winding temperature during continuous duty. Position data returns to the drive through digital servo feedback, allowing closed-loop torque and speed control without an external encoder package. Mechanical attachment uses flange and foot mounting, so the motor can be secured to a base plate or connected directly to a gearbox. Because the motor is supplied without a holding brake, an external holding method is needed when the load must remain fixed at standstill. Standard rolling bearings support the rotor and are matched to the permitted running conditions of the motor.

Electrical power is routed through a junction box located on side A of the frame, and the conductors enter from the top to simplify vertical cable routing and reduce sharp bends. The sizing identifier 184 corresponds to the selected frame dimensions and shaft height for medium-power conveyor or spindle drives. Internal balancing is done with a full key, and the drive end is supplied without a shaft seal to reduce friction losses. Side B has no shaft extension, which leaves clearance for feedback components or cooling airflow. A balance quality of vibration grade R limits running vibration during extended operation, while the CS winding and D length code describe the selected electrical and active stack arrangement for this motor size.