Product Description:

The 2AD184D-B35OC1-CS06-A2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat and part of the 2AD 3-Phase Induction Motors series. The unit converts three-phase electrical input into constant mechanical torque for conveyors, printing presses, and other automated machinery that operate under continuous duty. Integrated with compatible drives, it responds precisely to speed commands in industrial automation cells. This operating profile suits equipment that needs stable output during long production runs and repeatable motion under changing process loads.

It employs an axial blower rated at 400 V, and the forced-air path keeps the stator below its thermal limit. The cooling assembly uses an axial blower, which distinguishes the motor from self-ventilated frames. Position data reach the drive through digital servo feedback, enabling closed-loop speed regulation. Mechanical attachment uses flange and foot mounting, allowing either face or base installation. Power conductors exit the top of the housing and are guided toward side A to support orderly cable routing. Standard bearings support the rotor, while motor size code 184 and length code D identify the frame format, and winding code CS indicates the conductor pattern and insulation class used for the motor.

Because the motor is supplied without a holding brake, any axis that must stay fixed during power loss requires an external clamp or another holding method. The output side uses a smooth shaft without a seal, which reduces friction and eases alignment with pulleys or rigid couplings. The rear face is without a shaft end, which reduces overhung mass at the non-drive side. Electrical input is terminated in a junction box, which provides a protected connection point for incoming cables and keeps wiring separate from the active motor components. This arrangement also helps keep the external connection area accessible during installation and routine service.