Product Description:

The 2AD184C-B35RF1-CS16-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It supplies mechanical power to automated machine tools, material-handling axes, and similar equipment where a constant speed range and reliable torque are required to sustain repetitive industrial cycles. The motor is intended for industrial applications that need durable rotary output and stable operation during continuous or repeating duty. Its induction design suits systems that depend on consistent performance during frequent starts, stops, and changing loads.

Cooling is provided by an axial blower that operates from a dedicated supply of 400 V, so heat is removed without external ducts. A pair of standard bearings supports the rotor and helps limit axial and radial runout during long duty periods. The frame size is 184, and the C stack length indicates the housing length used for this version. Position and speed are returned to the drive by digital servo feedback, allowing closed-loop regulation. The motor uses flange and foot mounting, and the power connections terminate inside a right-side junction box with the cable exit arranged for straightforward routing.

An electrically engaged clamp brake provides holding force when power is removed, and its rated torque is 300 Nm. The shaft is supplied without shaft seal and is balanced with a full key to reduce transmitted vibration, while vibration grade R identifies the balancing class used for this motor. Side B is built without a shaft extension to save installation space near adjacent machine elements. Internal conductors use winding code CS, which corresponds to the electrical winding arrangement expected by compatible Rexroth inverters. This layout also helps keep motor power wiring separate from encoder lines inside the machine.