Product Description:

The 2AD184C-B35RF1-CS06-A2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Designed for fixed-speed or inverter-controlled service, it supplies continuous rotary power to conveying, forming, and packaging stations throughout automated lines. Size code 184 and length code C set its mechanical envelope, allowing the frame to fit inside standard machine compartments while still delivering the torque required for mid-range drive axes.

Thermal regulation is handled by an integrated axial blower that forces cooling air across the stator, and the blower runs from a dedicated 400 V supply so its airflow is independent of motor speed. Installation flexibility is supported by flange and foot mounting, allowing either end-face or base attachment without additional brackets. Position and speed signals are provided by digital servo feedback, enabling the controller to close the regulation loop with high resolution. Standard-class bearings minimize frictional losses, and winding code CS matches compatible drive parameters such as rated current and the thermal model.

Electrical power reaches the stator through a cast-on junction box that is oriented to the right side when facing the shaft, while the cable exits are routed to the left to simplify cabinet layout. The rotor uses a smooth shaft without a seal, and the opposite B-side is supplied without a shaft extension to reduce overall length. Motion can be stopped only by drive torque because the motor is delivered without a holding brake, so applications needing static torque must add an external brake module. Dynamic balance is classified as vibration grade R, keeping oscillations within limits for precision assemblies, and the foot-side power-in connection direction completes the mechanical interface.