Product Description:

The 2AD184C-B35OE1-CS06-A2V2 is an AC induction motor produced by Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series. With a frame identified by size code 184 and length code C, the unit supplies rotary motion for automated presses, mixers, and conveyor drives that must run continuously at their base frequency. Digital servo feedback is built into the stator so that external controllers can read exact rotor position, and the housing supports both flange and foot mounting for flexible placement inside industrial machinery.

The machine is rated for 50 kW of mechanical output while drawing a line current of 113 A. At its base speed of 1500 rpm, it delivers a continuous shaft torque of 318 Nm, allowing constant-torque operation without field weakening. An enclosure rating of IP65 keeps dust and water jets away from live parts, and heavy-duty bearings work with a rotor inertia of 0.46 kg·m² to damp load transients. Servo feedback pairs with a vibration grade S balance and a 70-minute thermal time constant so controllers can impose rapid duty cycles without overheating. Axial force up to 50 N can be imposed on the shaft, and the smooth, unsealed shaft end is intended for coupling sleeves rather than belt drives. The motor is supplied without a holding brake, reducing mass and making thermal calculations straightforward for long-duty applications.

An integral axial blower powered at 400 V draws 220 VA and moves 1950 m³/h of air through the stator ducts; its IP24 housing shields the fan against accidental drips while the overall acoustic emission remains at 80 dB(A). The power junction box accepts conductors down to 2 × 16 mm², routed from the top of the frame toward the right-hand side of a cabinet. Total motor mass is 366 kg, and the assembly remains anchored by flange bolts as well as foot pads, maintaining alignment while the blower keeps winding temperature inside safe limits.