Product Description:

The 2AD184C-B35OD1-CS07-D2N1 induction motor is produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It is an AC machine intended for integration with drive controllers where regulated torque and speed are required on conveyors, packaging stations, and forming equipment in industrial automation. In this role, the motor converts electrical input into rotary motion that can be controlled accurately for repeatable process movement. Its frame and stack dimensions match common European machinery interfaces, giving the motor a consistent footprint while maintaining the continuous-duty characteristics demanded in production environments.

Its physical and thermal profile is set by the Motor Size Code 184 and Motor Length Code C, which correspond to the motor's frame geometry and active length. Forced ventilation is provided by an axial blower, so heat is removed from the housing without relying on cabinet airflow. That blower is energized at 400 V, which matches typical three-phase auxiliary supplies. For installation, the unit supports flange and foot mounting, allowing either face mounting on gearboxes or base mounting on machine beds to suit existing mechanical layouts.

Electrical access is simplified because the power leads exit on side B and use a top-mounted connection position. Encoder feedback is handled through digital feedback with a multiturn absolute encoder, enabling the controller to read position over multiple revolutions for homing or torque-vector control. The motor is supplied without a holding brake, so holding force must be provided externally or by drive torque when power is removed. A junction box interface provides the electrical connection point, while the shaft seal, fully balanced key, and vibration grade R support stable mechanical integration with driven equipment.