Product Description:

The 2AD184C-B35OC1-CS0D-C2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Designed to work with frequency inverters and gearboxes, the unit converts electrical energy into rotational motion for material-handling lines, packaging stations, and general-purpose machine axes. Its frame size, winding arrangement, and integrated blower support continuous-duty operation where constant torque and quick overload recovery are required in automated production cells.

Cooling is provided by an axial blower that moves air across the stator, and the blower is rated for 400 V so it can be wired to a standard three-phase supply. Position feedback comes from an incremental encoder with 2500 increments, giving the controller tight speed regulation. Mechanical mounting is flexible because the housing supports flange and foot mounting, and electrical power enters through a top-mounted junction box. Terminals face Side A to simplify cabling. Length code C indicates the active stack, while winding code CS corresponds to the conductor fill used for the desired torque. Standard bearings support radial and axial loads in conveyors or gear stages.

The drive shaft is a smooth shaft with a shaft seal, which helps prevent lubricant escape and coolant ingress. Dynamic balancing meets vibration grade R, limiting oscillation transmitted to surrounding machinery. Frame designation 184 sets the center height and bolt circle for common gear reducers, and the unit is supplied without a holding brake, which is suitable where the inverter handles stopping. The rotor has no shaft extension on the rear side, easing installation and lowering overhung load. Length code C keeps mass moderate, and the top power connection position works with Side A orientation to maintain clear routing around the encoder housing.