Product Description:

The 2AD184C-B35OC1-CS07-D2N1 is an AC induction motor built by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. Designed for continuous service in machine tools, printing presses, and other automated stations, the motor converts three-phase electrical input into controlled mechanical rotation. It fits applications that require constant torque over a broad speed range and can be combined with intelligent drive controllers for closed-loop regulation. Its feedback capability and separate forced-air cooling path make it suitable for enclosed machine areas where passive heat dissipation is limited.

The motor uses an axial blower that drives air along the stator length, and the blower operates from 400 V to support stable thermal conditions during prolonged high-load duty. Standard bearings minimize friction while supporting service life under moderate radial and axial forces. Installation is supported by flange and foot mounting, allowing direct attachment to machine frames or base plates. All power conductors enter a junction box fixed on the top of the housing and are routed toward Side A for cleaner cable placement in multi-motor arrays. For motion control, the integrated multiturn absolute encoder delivers digital position data, enabling the connected inverter to track shaft angle across multiple revolutions without battery backup.

The mechanical envelope uses motor size 184 with length code C, giving a compact profile relative to the available torque. The shaft includes a seal and a full-keyed output, while the opposite B-side is supplied without a second shaft end, which supports single-sided power transmission. The assembly meets vibration grade R, helping limit transmitted oscillation to surrounding structures, and its stator uses winding code CS for compatibility with matched 2AD drives. A holding brake is omitted, so loads must be secured by external means when the drive is de-energized.