Product Description:

The 2AD184C-B35OC1-CS06-A2V1 is an AC induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Intended for continuous-duty motion axes in industrial automation, the motor converts electrical energy into rotational torque for pumps, presses, and material-handling stations where speed stability and long service life are required. A framed stator, blower-assisted cooling, and encoder feedback enable a connected inverter to close precise velocity and position loops in distributed control architectures.

Cooling is provided by an axial blower that runs at 400 V, maintaining airflow across the stator even when the shaft turns slowly. The rotor is carried by heavy-duty bearings capable of handling high radial forces from belts or gears. Because the unit is supplied without a holding brake, any static load must be secured by mechanical locks or regenerative torque from the drive. Motion data returns to the controller through digital servo feedback, which supports high-resolution closed-loop regulation. Power conductors enter a top-mounted junction box; the box faces Side A to simplify cable routing, and the housing accepts flange and foot mounting so the motor can sit vertically or horizontally inside a machine frame.

The remaining features describe the motor's mechanical profile. The motor has size code 184, which indicates the frame height, while length code C gives a medium stack that balances torque output with enclosure depth. Torque reaches the load through a smooth shaft without a shaft seal, and the reverse face is finished without a shaft end to streamline coupling alignment. Dynamic behavior matches vibration grade R, keeping imbalance within limits for high-speed induction rotors. The motor uses winding code CS, which aligns current and thermal ratings with common drive platforms.