Product Description:

The 2AD184C-B35LC1-CS36-E2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a three-phase workhorse, it supplies controlled rotary power to machine tools, packaging equipment, and conveying axes where continuous duty and closed-loop control are required in industrial automation. This motor is intended for applications that need reliable torque delivery across changing load conditions. It is often used where a separate drive controller manages acceleration, deceleration, and constant-speed operation with repeatable results.

The motor uses an integrated axial blower, and the blower runs from a 400 V supply so forced air continues across the stator even at low shaft speed. An electrically released heavy-duty brake provides 240 Nm of holding torque, helping vertical axes remain stationary when power is removed. Position and speed data are returned through digital servo feedback, giving the connected drive the information needed for stable regulation. The housing supports flange and foot mounting, and cabling enters on Side A through a junction box mounted on the left side of the front face. The windings are balanced to vibration grade R, and standard bearings support the rotor. The motor has a half-key balanced shaft without a seal, and the opposite end is not prepared for a second output shaft.

The size code 184 indicates the motor frame size. The length code C identifies the housing length, and winding code CS indicates the electrical design used with compatible drives. Side B is without a shaft end, so the motor uses a single mechanical output interface. This layout can simplify coupling arrangements where only one driven side is needed, and it leaves more clearance at the non-drive end for surrounding machine components. The coding also helps distinguish this version from other motor lengths and winding combinations within the same product line.